630 bar (Bx 1215)
The Beamex 630 bar hoses are rated for 630 bar / 9100 psi at 50 °C / 122 °F and have Bx 1215 female threads in ends.
See more about connecting these hoses to internal and external pressure modules in Pressure fittings guide.
Specifications
- Outer diameter: 5 mm / 0.2”
- Smallest bending radius: 20 mm / 0.78”
- Max working pressure: 630 bar / 9,100 psi
- Min bursting pressure: 2000 bar / 29,000 psi
- Operating temperature range: -35 to 100 °C / -31 to 212 °F
Usage instructions
- Never exceed the maximum working pressure of the pressure hose. Environmental conditions may also limit the maximum pressure
- For reliable and safe performance of your calibrator, always use original Beamex pressure hoses.
- Do not use the same hose for gases and liquids.
- Avoid performing pressure calibrations in direct sunlight; thermal expansion of the hose can cause unstable readings.
- Do not bend the hose to a radius smaller than 20 mm; this will cause damage.
- Immediately replace the hose if it shows any damage, kinks, cracks in the outer shell, or bent connectors.
- Beamex recommends replacing all pressure hoses every five years, even if no damage is visible.