Product Overview
Replaceable inserts with different sized holes are to be used with MC6-T to allow calibration of temperature sensors with different diameters. Diameter of the hole is recommended to be 0,2...0,3 mm larger than the outer diameter of the instrument to be calibrated, at most 0,5 mm. For reliable and safe performance of the calibrator, use only original Beamex MC6-T inserts. Inserts are not included in the standard delivery of MC6-T.
Insert dimensions
- diameter: 30.0 mm / 1.18 inch
- length: 158.5 mm / 6.24 inch (see exceptions for sanitary blank, MH5, MH6)
- hole depth: 154.0 mm / 6.06 inch (see exceptions for MH5, MH6)
Insulation shield
All inserts for MC6-T150 include two insulation rubber shields, either blank or with similar holes than the insert. Use the insulation shield to avoid condensation at temperatures below ambient.
- MC6-T150 blank (5655100)
- Blank, undrilled insert, includes two blank insulation rubber shields (5655180)
- MC6-T150 sanitary blank (5655105)
- Blank, undrilled insert for short / sanitary sensor calibration. Insert length 166 mm / 6.54". This insert is slightly longer than regular insert to reach the top surface of the calibrator and to allow calibration of sensors with a flange, e.g. tri-clamp sanitary sensors.
- MC6-T150 MH1 (5671301)
- Multi-hole insert with holes for 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 1/4" sensors, includes two insulation rubber shields (5655201).
- MC6-T150 MH2 (5671302)
- Multi-hole insert with holes for 2 x 3 mm, 2 x 4 mm, 6 mm, 1/4" sensors, includes two insulation rubber shields (5655202).
- MC6-T150 MH3 (5671303)
- Multi-hole insert with holes for 3 mm, 3 x 1/4", 3/16", 1/8", 3/8" sensors, includes two insulation rubber shields (5655203).
- MC6-T150 MH4 (5671304)
- Multi-hole insert with holes for 3 mm, 2 x 1/4", 2 x 3/16", 2 x 3/8" sensors, includes two insulation rubber shields (5655204).
- MC6-T150 MH5 (5671305)
- Multi-hole insert with holes for 6 mm flanged sanitary sensor and a 3 mm reference sensor. Insert diameter 30.0 mm (1.18") and length 166 mm (6.54"). Maximum length for the sensor to be calibrated is 50 mm. Insert is slightly longer than regular insert to reach the top surface of the calibrator and to allow calibration of flanged sensors.
- MC6-T150 MH6 (5671306)
- Multi-hole insert with holes for 1/4 in flanged sanitary sensor and a 3 mm reference sensor. Insert diameter 30.0 mm (1.18") and length 166 mm (6.54"). Maximum length for the sensor to be calibrated is 2 inches. Insert is slightly longer than regular insert to reach the top surface of the calibrator and to allow calibration of flanged sensors.
Special inserts
Customized inserts are based on blank inserts (5655100 or 5655105) and can be designed based on customer needs. Up to 7 straight holes can be drilled, diameter min 3 mm. Technical approval for the design is needed. Multiple pre-designed special inserts are available on request.
